① Standard fuel injector type.
②High pressure fuel injector type.
③ Wide working frequency and time range.
④ LCD screen.
1. Standard fuel injection nozzle type: that is, the car's naturally aspirated fuel injection nozzle, DC 12V voltage can drive the solenoid valve on the fuel injection nozzle.
2. Types of high pressure fuel injectors: the turbocharged fuel injectors for automobiles, the instantaneous voltage of 75V can drive the solenoid valve in the fuel injector.
3. Wide operating frequency range: The operating frequency range can reach 600~4000rpm.
4. Working time range: The working time setting range can reach 0~99 minutes.
5. LCD display: the working frequency and time are digitized for more precise adjustment.
1. Easily solve common faults such as stuck, blocked, leaked, or insufficient combustion of the fuel injector.
2. The pulse width and RPM can be continuously adjusted and different programs can be applied to drive the injectors.
3. During the cleaning process, pulse cleaning can be achieved by adjusting the RPM and width to optimize the cleaning effect, Remove carbon deposits from the fuel system.
4. Can be used with any fuel pressure tester.
5. This device can also be used with ultrasonic cleaners and older fuel injector testers. The drive mode of the GDI engine injector added to this machine can be used as an upgrade kit for the old version of the machine (machine without GDI drive).
1. Make sure the car engine must be turned off before using this device.
2. Do NOT smoke or light near the car.
3. Do not spill the car's fuel on hot engine parts.
4. Perform this device in a well-ventilated place only .
5. Do NOT approach any rotating parts of the car, and do NOT touch any heating parts of the car.
6. Do NOT touch any car parts with dangerous voltage logo.
7. Wear qualified goggles.
1. Turn off the vehicle engine and remove the fuel injectors from the engine.
2. Connect the pulse output to the fuel injector power input port.
3. Connect the positive and negative electrode clamps to 110V/220V power.
4. Press RPM \"+\"-\" key to select the required analog speed. Press \"Start\" button to make the device start to work.
5. Select the required injector.
6. Put the device into the connection equipment and then press the carburetor cleaner.
7. Press RPM \"+\" and \"-\" keys, the Tester will output pulse to the injector, and then the pulse signal indicator lights up, the device will start to work.
8.Use pressure washer, you need to select the corresponding connector and connect it well. Press the start button to start spraying, and observe the spray status and spray angle with your naked eye.
1. Please make sure the car engine must be turned off before using this device.
2. Do not smoke or light near the car.
3. Do not spill car fuel on hot engine parts.
4. Do this device only in a well-ventilated place.
5. Do not get close to any rotating parts of the car and do not touch any heating parts of the car.
6. Do not touch any car parts with dangerous voltage logo.
7. Wear qualified glasses.
The cleaning agent is used to clean the attachments (carbon deposits) on the fuel injectors. It is generally highly corrosive and flammable. It should be kept away from the fire source and avoid contact with the skin when used. Use it in the ultrasonic cleaning bath of the injector cleaner.
What is a test fluid?The test fluid is used to test and judge the quality of the fuel injectors. It is a colorless and transparent liquid with no irritating odor, non-corrosiveness, and not easy to emit, but used in the measuring glass of the fuel injector cleaning machine.
1. Global Leading Brands ,popular among customers, worth to trust.
2.We are the Only AUTOOL Official Store in Walmart ! 100% original products , best price and Three-year warranty.
3.All products have been passed strict quality test before shipment, make sure high quality. Lifetime Tech Support from AUTOOL Official Store.
4. Support Wholesale Price and Dropshipping.
In addition, AUTOOL also has a number of series of products developed for repairing different parts of the vehicle, such as car EVAP smoke machine, HVAC digital manifold gauge, engine de-carbon clean machine, OBD2 diagnostic scanner, car oil quality detector, battery tester, circuit tester and car diagnostic multimeter etc. If you are interested in this, you can click on the link below to learn more.
In addition, AUTOOL also has several series of products that are specifically used to repair different parts of the vehicle, such as fuel injector cleaners and testers, HVAC digital manifold meters, engine carbon removal cleaners, OBD2 diagnostic scanners, automotive oil quality testers, battery testers, circuit testers and automotive diagnostic multimeters, etc. If you are interested in this, you can click the link below to go to our store to learn more or directly click on the series of products below to learn more.
OBD2 Diagnostic Scanner Series>>
